How to Replace Sliding Glass Door Rollers in 7 Easy Steps

    Need help with a sliding door?

    Looking for a sliding door technician near you? When it comes to sliding door installation and repairs in Los Angeles and the surrounding communities, you need an expert you can count on. We are a locally owned professional sliding door repair company with over 15 years experience.

    CALL US FOR AN ESTIMATE: ☎️ (213) 986-2950

    Or, fill out the following form and we will contact you as soon as possible.




    Show us? Send us some photos for a FREE cost estimate.

    Scroll down to read the rest of this article titled How to Replace Sliding Glass Door Rollers in 7 Easy Steps.

    how to replace sliding glass door rollers

    If you have a sliding glass door, then you know how important the rollers are. They help the door move smoothly and efficiently. If they start to wear down, it can be difficult to open and close the door. In this blog post, we will show you how to replace the rollers in your sliding glass door in 7 easy steps!

    What are sliding glass door rollers?

    Sliding glass door rollers are the small wheels that are attached to the bottom of the door. They help to hold up the door and allow it to slide open and closed smoothly. Over time, they can start to wear down and become less effective. This can cause the door to become difficult to open and close.

    If you notice that your sliding glass door is becoming difficult to move, it might be time to replace the rollers. Follow these seven easy steps and you’ll have your door working like new in no time!

    Step One: Remove the Old Rollers

    The first step is to remove the old rollers from the bottom of the door. You will need a screwdriver for this. Start by removing the screws that hold the roller in place. Then, gently pull the roller out of the track. Repeat this for all of the rollers on the bottom of the door.

    Step Two: Clean Out the Tracks

    Once you have removed all of the old rollers, it’s time to clean out the tracks. Use a vacuum to remove any dirt, dust, or debris that might be inside. You can also use a cotton swab or an old toothbrush to get rid of any stubborn dirt.

    Step Three: Measure The Door

    Now that the tracks are clean, it’s time to measure your door. You will need to know how wide and how tall your door is so that you can buy new rollers that fit properly.

    Step Four: Buy New Rollers

    Now that you have the measurements of your door, it’s time to buy new rollers. Make sure to get ones that are the same size as the old ones. You can find these at most hardware stores or online.

    Step Five: Install The New Rollers

    Installing the new rollers is easy! Just place them into the tracks and use a screwdriver to secure them in place. Start with the top roller first and then work your way down. Make sure that all of the screws are tight so that the rollers don’t come loose.

    Step Six: Test The Door

    Once you have installed all of the new rollers, it’s time to test the door. Open and close it a few times to make sure that it is moving smoothly. If everything looks good, then you’re finished!

    Step Seven: Enjoy Your New Door!

    You did it! You have successfully replaced the rollers in your sliding glass door. Now you can enjoy opening and closing your door without any difficulty.

    We hope that these seven steps were easy to follow and that you now have a working door that you can be proud of! But we always recommend contacting an expert.

    If you enjoyed this blog post, be sure to check out our other posts on home improvement tips and tricks!

    We cover everything from how to paint your walls to how to install new light fixtures. We know that there’s always something that needs to be done around the house, and we’re here to help! Thanks for reading!

    5/5 - (1 vote)

    Recommended articles

  • Call us 24 hr

    ☎️ (213) 986-2950

    Garage Door Repair Edmonton

  • Recent Posts

  • Tags

  • Contact Us
    COVID-19 NOTICE:
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar